I got myself a Me2 1000s.
I already tried some stuff before I found this site and have currently a working cross-toolchain running on my host linux system.
So I thounght it would be a good idea to start messing with this thing by upgrading the old BusyBox. So I downloaded and compiled the newest BusyBox (v1.11.1). From my personal feeling: I got it installed but telnet no longer works. The port itself is open.
PORT STATE SERVICE
23/tcp open telnet
80/tcp open http
139/tcp open netbios-ssn
445/tcp open microsoft-ds
and telnet says:
Connected to 192.168.0.45.
Escape character is '^]'.
Connection closed by foreign host.
I have noc hance to enter a command.
What I think is that the inetd is running and has opened the ports, but once I connect it starts telnetd and (maybe, somehow) fails.
The Box itself is still useabe (Menu works). And I also can reset the firmware if needed. But then I stuck again with the old BusyBox.
Maybe its just a fault in the telnetd configuration which possibly changed from the old to the new BusyBox. But I don't know where to find/setup it.
Any help would be verry welcome.
P.S.: forgive my bad english